Brother DCP-J1700DW, Online User'S Manual

Page: 242 / 360

Error Message Cause Action
Paper Size Mismatch
The paper size setting does not match the
size of paper in the tray.
-
OR -
You did not set the paper guides in the
tray to the indicators for the paper size
you are using.
1. Check that the paper size you selected
on the machine's display matches the
size of the paper in the tray.
See
Related Information : Change the
Paper Size and Paper Type .
2. Make sure you loaded the paper in the
correct orientation and set the paper
guides at the indicators for your paper
size.
See
Related Information : Load Paper .
3. After you have checked the paper size
and the paper orientation, follow the
LCD instructions.
If you are printing from your computer,
make sure the paper size you selected in
the printer driver or in the application you
use to print matches the size of paper in
the tray.
See
Related Information : Print Settings
(Windows) .
If the paper is A5 size, check that it is
loaded in the tray in portrait orientation.
Paper Tray not
detected The paper tray is not completely inserted. Slowly push the paper tray completely into
the machine.
Paper or a foreign object has prevented
the paper tray from being inserted
correctly. Pull the paper tray out of the machine,
and remove the jammed paper or foreign
object. If you cannot find or remove the
jammed paper, see
Related Information :
Printer Jam or Paper Jam .
Repetitive No Paper
Fed The machine is out of paper or paper is
not correctly loaded in the paper tray. Do one of the following:
•
Refill the paper tray, and then follow
the LCD instructions.
• Remove and reload the paper, and
then follow the LCD instructions.
See Related Information : Load Paper .
Paper dust has accumulated on the
surface of the paper pick-up rollers. Clean the paper pick-up rollers.
See
Related Information : Clean the Paper
Pick-up Rollers .
Replace Ink One or more of the ink cartridges have
reached the end of their lives. The
machine will stop all print operations. Replace the ink cartridges.
See
Related Information : Replace the Ink
Cartridges .
You can still scan even if the ink is low or
needs to be replaced.
The maximum number of
devices are already
connected using Wi-Fi
Direct. The maximum number of mobile devices
are already connected to the Wi-Fi Direct
network when the Brother machine is the
Group Owner. After the current connection between your
Brother machine and another mobile
device has shut down, try to configure the
Wi-Fi Direct settings again. You can
confirm the connection status by printing
the Network Configuration Report.
See
Related Information : Print the
Network Configuration Report .
Touchscreen Init.
Failed The touchscreen was pressed before the
power on initialisation was completed. Make sure nothing is touching or resting
on the touchscreen, especially when
plugging the machine in.
237