Brother DCP 8085DN, Service Manual

Page: 98 / 652

3-7
Confidential
Not Registered You tried to access a One
Touch or Speed Dial
number that is not
programmed.
Set up the One Touch or Speed Dial
number.
3-74
Out of Memory The machine’s memory is
full.
Fax sending or copy operation in
progress
Do one of the following:
Press Start to send or copy the
scanned pages.
Press Stop/Exit and wait until the
other operations in progress finish,
and then try again.
Clear the data from the memory.
Print operation in process
Do one of the following:
Reduce print resolution.
Clear the faxes from the memory.
3-35
Print Unable XX The machine has a
mechanical problem.
Perform processing with the error
code.
3-12
3-13
3-18
3-19
3-20
3-21
3-37
3-38
3-39
Protected Device The protect switch of the
USB Flash memory drive
is on.
Turn off the protect switch of the USB
Flash memory drive. 3-36
Rename the File There is already a file on
the USB Flash memory
drive with the same name
as the file you are trying to
save.
Change the file name of the file on
the USB Flash memory drive or the
file you are trying to save. -
Replace Parts
Drum or
Replace Drum
The drum unit is the end of
its life.
Replace the drum unit.
3-14
The drum unit counter was
not reset when a new drum
was installed.
1) Open the front cover, and then
press Clear/Back .
2) Press 1 to reset.
Replace Parts
Fuser Unit or
Replace Fuser
It is time to replace the
fuser unit.
Replace the fuser unit.
3-15
Replace Parts
Laser Unit or
Replace Laser
It is time to replace the
laser unit.
Replace the laser unit.
3-15
Replace Parts
PF Kit MP or
Replace PF Kit
MP
It is time to replace the
paper feeding kit for the
MP tray.
Replace the PF Kit MP.
3-14
Replace Parts
PF Kit 1 or
Replace PF Kit 1
It is time to replace the
paper feeding kit for Tray
1.
Replace the PF Kit 1.
3-15
Error Message Type of Error Action
Refer
to