Brother DCP 8085DN, Service Manual

Page: 547 / 652

7-29
Confidential
4.13 EEPROM Customizing (User-accessible) (Function code 52)
<Function>
This function allows users to customize the EEPROM settings such as language, function
settings or worker switch settings.
<Operating Procedure>
(1) Press the [ Menu ], [ Black Start ] and [ Menu ] buttons in this order in the ready state.
The “0” will appear on the LCD.
(2) Press the [ 5 ] and [ 2 ] keys in this order.
The “Set Country” will appear on the LCD, and the country name will appear on the LCD.
(3) Press the [ ] or [ ] button to display the country name where the machine is used.
Press the [ OK ] button while the country name is being indicated.
(4) The “1.Yes, 2.No” will appear on the LCD. Press the [ 1 ] key when it is good in the
displayed country.
The EEPROM is customized, and the machine returns to the ready state.
Press the [
2 ] key when it is mistake in the displayed country. Return to the procedure (3)
and enter the country again.
Note:
• This function is applicable to “France and surrounding countries”, “Pan-Nordic”,
“Oceania” and “Iberia” areas only.
Note:
• The country name indicated on the LCD varies depending on the area (code input in
Function code 74 ) as shown in the table below.
France and
surrounding
countries
Oceania Pan-Nordic Iberia
France Australia Norge España
België / Belgique New Zealand Suerige Portugal
Nederland - Suomi -
- - Danmark -
- - Others -