Brother DCP 8085DN Service Manual Download Page 559

Page: 559 / 652

7-41

Confidential

4.21 Display of the Machine’s Log Information (Function code 80)

<Function>

The machine may display its log information on the LCD.

<Operating Procedure>

(1) Press the [

] and [

] keys in this order in the initial stage of the maintenance mode. The

USB serial number appears on the LCD.

(2) Press the [

Start

] button. Each time the [

Start

] button is pressed, one of the following

information items appears on the LCD. The representative items are given below.

(3) Press the [

Stop/Exit

] button so that the machine stops this operation, beeps for one

second and returns to the initial stage of the maintenance mode.

*1 When you press the [

] button while the MACHINE ERR error code is displayed,

the last error code is displayed. Each time the [

] button is pressed, up to the ten

error codes are displayed one by one in reverse order.

*2 When you press the [

] button while the COMEER1 error is displayed, the last

error, the previous error, and the second previous error are displayed in turn. The
indication changes from COMEER1, COMEER2, to COMEER3.

USB:

Serial number

DRUM:

Drum count

DRUM_PG

Number of printed pages with the drum unit.

DRUM_CH

Number of times the drum unit has been replaced.

KTN_PG1:

Number of printed pages with the Black toner cartridge.

KTN_PG2:

Previous number of printed pages with the Black toner cartridge.

KTN_CH:

Number of times the Black toner cartridge has been replaced.

WTNR_PG:

Number of printed pages with the waste toner box. *

WTNR_CH:

Number of times the waste toner box has been replaced. *

BELT_PG:

Number of printed pages with the belt unit. *

BELT_CH:

Number of times the belt unit has been replaced. *

PFMP_PG:

Number of Printed pages with the MP paper feeding kit.

PFMP_CH:

Number of times the MP paper feeding kit has been replaced.

PFK1_PG:

Number of Printed pages with the T1 paper feeding kit.

PFK1_CH:

Number of times the T1 paper feeding kit has been replaced.

PFK2_PG:

Number of printed pages with the LT paper feeding kit.

PFK2_CH:

Number of times the LT paper feeding kit has been replaced.

FUSR_PG:

Number of printed pages with the fuser unit.

FUSR_CH:

Number of times the fuser unit has been replaced.

LASR_PG:

Number of printed pages with the laser unit.

LASR_CH:

Number of times the laser unit has been replaced.

KCVRGUSI:

Coverage with the toner cartridge. (%) *

KCVRGACC:

Cumulative coverage (%) *

TTL_PG:

Total number of printed pages

TTLCOPY:

Number of copies made

TTLPCPT:

Number of PC prints made

Summary of Contents for DCP 8085DN













































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DCP 8085DN

Reviews:

Brands by name

Popular brands

Brother DCP 8085DN, Service Manual

Search results

Summary of Contents for DCP 8085DN

Reviews:

Brands by name

Popular brands