manualshive.com logo in svg

Brother Industries DCP-T520W, Online User'S Manual

Share
Download
Brother Industries DCP-T520W Online User'S Manual Download Page 367

1

6. Slowly pull the jammed paper (1) out of the machine.

1 

IMPORTANT

•

DO NOT touch the encoder strip, a thin strip of plastic that stretches across the width of the machine
(1). Doing this may cause damage to the machine.

1

•

If the print head is in the right corner as shown in the illustration (2), you cannot move it. Follow these
steps:
a. Close the scanner cover, and then reconnect the power cord.
b. Open the scanner cover again, and then press and hold the 

Detener/Salir (Stop/Exit)

 button until

the print head moves to the center.

c. Unplug the machine from the power source and gently remove the jammed paper.

361

Summary of Contents for DCP-T520W






















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands