Brother Industries DCP-T520W Page 63 Online User'S Manual Download

Page: 63 / 501

Home >

Paper Handling

Load Documents

> Load Documents on the Scanner Glass

Load Documents on the Scanner Glass

Use the scanner glass to fax, copy, or scan one page at a time.

Document Sizes Supported

Length:

Up to 11.7 in. (297 mm)

Width:

Up to 8.5 in. (215.9 mm)

Weight:

Up to 4.4 lb (2 kg)

(ADF models)
To use the scanner glass, the ADF must be empty and the ADF document support must be closed.

1. Lift the document cover.
2. Place the document

face down

in the upper left corner of the scanner glass as shown in the illustration.

3. Close the document cover.

IMPORTANT

If you are scanning a book or thick document, DO NOT forcefully close or press on the document cover.

Related Information

•

Load Documents

Related Topics:

•

Copy a Document

•

Telephone and Fax Problems

•

Summary of Contents for DCP-T520W





















































































































































































































































































































































































































































































































Search results

Summary of Contents for DCP-T520W

Reviews:

Related manuals for DCP-T520W

Brands by name

Popular brands

Brother Industries DCP-T520W, Online User'S Manual

Search results

Summary of Contents for DCP-T520W

Reviews:

Related manuals for DCP-T520W

Brands by name

Popular brands