Brother Industries DCP-T520W Online User'S Manual Download Page 102

Page: 102 / 501

Scan Using the Scan Button on Your Machine

Scan Photos and Graphics

Send scanned photos or graphics directly to your computer.

Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent
changes, use Brother iPrint&Scan.

>> DCP-T520W/DCP-T525W/DCP-T720DW/DCP-T725DW/DCP-T820DW/DCP-T825DW
>> MFC-T920DW/MFC-T925DW

DCP-T520W/DCP-T525W/DCP-T720DW/DCP-T725DW/DCP-T820DW/DCP-T825DW

1. Load your document.

2. Press

(

ESCÁNER (SCAN)

3. Press

to select the

[Scan to PC]

option, and then press

4. Press

to select the

[Image]

option, and then press

5. If the machine is connected to a network, press

to select the computer where you want to send data,

and then press

If the LCD prompts you to enter a PIN, use the control panel to enter the four-digit PIN for the computer,
and then press

6. Do one of the following:

•

To change the settings, press

Opciones de Copia / Escáner (Copy / Scan Options)

, and then go to the

next step.

•

To use the default settings, press

Inicio Negro (Black Start)

Inicio Color (Color Start)

[Color Setting]

depends on the default settings. Pressing

Inicio Negro (Black Start)

Inicio

Color (Color Start)

does not allow you to change the settings.

To use scan options, you must connect a computer with Brother iPrint&Scan installed to the machine.

7. The machine will prompt you to set each of the following scan settings. Press

to select the desired

option, and then press

to proceed to the next scan setting.

•

[Color Setting]

•

[Resolution]

•

[File Type]

•

[Document Size]

•

[Remove Bkg Clr]

8. Press

Inicio Negro (Black Start)

Inicio Color (Color Start)

Summary of Contents for DCP-T520W





















































































































































































































































































































































































































































































































Search results

Summary of Contents for DCP-T520W

Reviews:

Brands by name

Popular brands

Brother Industries DCP-T520W, Online User'S Manual

Search results

Summary of Contents for DCP-T520W

Reviews:

Brands by name

Popular brands