manualshive.com logo in svg

Brother Industries DCP-T520W, Online User'S Manual

Share
Download
Brother Industries DCP-T520W Online User'S Manual Download Page 362

1

6. Place both hands under the plastic tabs on both sides of the machine to lift the scanner cover (1) into the

open position.

1

7. Slowly pull the jammed paper (1) out of the machine.

1 

8. Move the print head (if needed) to take out any paper remaining in this area. Make sure scraps of paper are

not left in the corners of the machine (1) and (2).

1

2

IMPORTANT

•

DO NOT touch the encoder strip, a thin strip of plastic that stretches across the width of the machine
(1). Doing this may cause damage to the machine.

356

Summary of Contents for DCP-T520W






















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands