35
Troubleshooting guide
This table is a basic guide to fault finding. The
fault may be a simple fix.
If you have any doubts
cease using the Ypush and contact your dealer.
Your dealer is there to help you but they can only
do this if you give them as much information as
possible. Remember correct information will get
the problem fixed quicker and save you money.
Contact your dealer and explain exactly what the
problem is, recounting as much detail as possible
including the indicated faults.
Symptom
Ypush does not move
when power is switched on.
Ypush pulls to one side.
Ypush behaves erratically when driven.
Short Range
Solution
Battery flat - check level.
Is the charger connected? – disconnect
charger.
Electrical protection breaker has
operated - reset.
There is no occupant in the seat – The
seat pressure sensor in the seat cuts
drive power as a safety measure when
no occupant is present. For test
purposes add a 10kg weight to the seat.
Check for tyre damage.
Motor or controller issue - contact dealer.
Binding bearings – contact dealer.
Binding Brakes – contact dealer
Possible electronic problems -
contact dealer.
Check tyres for damage.
Check battery is charging fully.
Check vehicle moves easily with brake
override levers engaged.
Summary of Contents for YPPAW/01
Page 19: ...Setting up the Ypush Unpacking the wheelchair 19 33 37 34 36 35 40 39 38 41 42 44 43...
Page 23: ...Packing up the Ypush For transport or storage 23 49 53 57 52 51 56 60 50 55 59 54 58 Pull up...
Page 42: ...Brintal Ypush Owner s Manual and Service Record 42 Notes...
Page 43: ...43 Notes...
