For transportation and or storage purposes it may
be necessary to pack up the Ypush in to its travel
bag. To do this, perform the following steps:
1
Ensure no occupant or animal/s are in the seat
and the Ypush is on level ground.
2
Remove the ignition key.
3
Unzip the roller bag and stand it so that
the roller wheels are on the ground.
4
Disconnect the battery by withdrawing
the battery connection plug.
49
5
Fit the grey isolator bung into the battery
charge socket.
50
6
Remove the battery pack by pulling the
battery retainer button and lift the battery
clear of the Ypush battery pack compartment.
Take care not to damage the battery connection
plug.
51
7
Pack the battery in the battery bag to protect
It and stow safely.
52
8
Grip the foot rest plates and fold them so
that they are vertical.
9
Fold down the push handles by compressing
the safety catch with one hand and folding
down with the other.
53
54
10
Grip the seat fabric along the front edge
and pull up. This will allow the Ypush to
start to fold.
55
11
Raise both foot rest assemblies until
vertical.
56
12
Fold the Ypush fully closed by pushing the
armrests towards each other.
57
13
Fit the frame securing strap in place.
58
14
Roll the Ypush into the bag and zip-up
fully.
59
15
Re-attach the pull strap at the desired
height.
60
Packing up the Ypush
For transport or storage
Brintal Ypush
Owner’s Manual and Service Record
22
Warning!
Store the battery safely –
Be sure to observe the battery storage/
charging and use temperatures noted in the
specification section of this manual.
Summary of Contents for YPPAW/01
Page 19: ...Setting up the Ypush Unpacking the wheelchair 19 33 37 34 36 35 40 39 38 41 42 44 43...
Page 23: ...Packing up the Ypush For transport or storage 23 49 53 57 52 51 56 60 50 55 59 54 58 Pull up...
Page 42: ...Brintal Ypush Owner s Manual and Service Record 42 Notes...
Page 43: ...43 Notes...
