Brintal YPPAW/01, Owners Manual & Service Record

Page: 10 / 44

Accelerator: The Ypush can be pushed manually
or driven in power-assisted mode.
Power-Assisted mode:
The accelerator thumb
control
5
is actuated using thumb pressure.
Gently press down and the Ypush will accelerate
proportionally until the maximum pre-set speed
is reached. Release and the vehicle will no longer
have power drive. If the attendant releases the
push handles, automatic independent braking will
also be applied.
Forward and reverse control To switch between
forwards and reverse driving modes, come to a
stand-still and press the grey direction switch
once.
6
In reverse mode, a reversing beep will be
heard. Be very careful that there is ample space
behind you (the attendant) to be able to safely
complete the manoeuvre. If you become worried
at any time simply release the throttle control.
Note: On start-up the Ypush always defaults to
forward driving mode for safety.
Charging Point: This is situated underneath the
left hand armrest.
7
For further details see the
Battery & Charging section of this manual.
USB Port: USB devices may be connected with a
current consumption of up to 2.0Amps maximum.
To connect: Remove the rain cap by unscrewing
it & connect your USB device.
8
Replace the cap
when the port is not in use.
Brakes – Lock & Unlock: The automatic braking
system may be locked and unlocked using the 2
green handle-mounted brake override /release
levers.
These levers must both remain in the
override unlocked (SAFE/BRAKES applied)
position in normal use.
The Lock function is only
to enable moving of the Ypush when unoccupied.
See the Braking section of this manual for full
details.
Controls
Accelerator/Power-assisted mode
Forward and reverse control/Charging point
USB port/Brakes
Brintal Ypush
Owner’s Manual and Service Record
10
5
6
8
7