Mechanical Anti-tip System:
Your Ypush
features mechanical anti-tip wheels fitted at the
rear of the unit. These should be left installed on
the Ypush whenever it is being driven with an
occupant in the seat as they are safety devices
that reduce the risk of injury from tipping over
backwards if excessive gradients are attempted.
The anti-tip wheels (x2) are fitted at the rear of
the Ypush and should be removed and stored
on-board when using the Ypush Roller Bag to
transport it. Follow these steps to remove, stow
and replace these devices (x2)
1
Removal:
Remove the anti-tip wheels from the
storage position by pressing the spring button
and pulling the bar out of the grey tube towards
the front of the Ypush
18
2
Installation:
Take the wheels to the rear of
the Ypush and insert it into the grey tube
whilst pressing the spring button.
19
Make sure
that the wheels are pointing downwards.
3
Make sure that the spring button reappears
through the hole to confirm the wheels are
locked in place.
20
4
Stowing the anti-tip wheels:
Simply reverse
the above procedure. Make sure that the
spring button reappears in the stowed position to
prevent the anti-tip wheels from getting lost
during transit.
21
Before driving the Ypush
Mechanical anti-tip system
Brintal Ypush
Owner’s Manual and Service Record
14
18
19
21
20
Summary of Contents for YPPAW/01
Page 19: ...Setting up the Ypush Unpacking the wheelchair 19 33 37 34 36 35 40 39 38 41 42 44 43...
Page 23: ...Packing up the Ypush For transport or storage 23 49 53 57 52 51 56 60 50 55 59 54 58 Pull up...
Page 42: ...Brintal Ypush Owner s Manual and Service Record 42 Notes...
Page 43: ...43 Notes...
