Attendants must practice driving the Ypush
before carrying any occupant.
Before you start:
Place a weight of 10 to 15 Kgs
on the seat – This will override the occupant
sensor and permit attendant only driving. Find an
open level area with no obstructions to practice
controlling the Ypush until you are confident that
you can drive it safely.
Brakes:
Make sure that the brake override levers
are in the unlocked (brakes on) position.
12
Check that both of the brakes are on by trying to
push the Ypush. Neither rear wheel should turn.
Unlocked (safe) position
12
Locked position
13
Battery:
Test, connect and install the battery pack
as shown in the Battery and Charging section of
this manual. If the battery has been removed for
air transport/storage then first remove the grey
isolating plug/bung.
14
Set the pre-set speed control to the minimum
(fully counter- clockwise).
15
Before driving the Ypush
Brakes/Battery
Brintal Ypush
Owner’s Manual and Service Record
12
12
13
15
14
Summary of Contents for YPPAW/01
Page 19: ...Setting up the Ypush Unpacking the wheelchair 19 33 37 34 36 35 40 39 38 41 42 44 43...
Page 23: ...Packing up the Ypush For transport or storage 23 49 53 57 52 51 56 60 50 55 59 54 58 Pull up...
Page 42: ...Brintal Ypush Owner s Manual and Service Record 42 Notes...
Page 43: ...43 Notes...
