PORTOFINO RESTYLING
rev.4 - 03/2008
Revision july 2002
Should the brewing time of 5 consecutive deliveries be shorter than the optimal
interval,the machine alerts the operator that the grinding is too coarse through the
blinking of the LEDS nr. 2 and nr. 5 (pict.1).
Should the brewing time of 5 consecutive deliveries be longer than the optimal interval
the machine alerts the operator that the grinding is too fine through the blinking of the
LEDS nr. 3 and nr. 6 (pict. 1).
Alarm will disappear automatically with a right coffee delivery (brewing time within
the optimal range).
OPTIMAL TIME SETTING
To set the optimal time please follow the instructions below :
1
Fill the filter holder with the ground coffee quantity you wish, at the size you prefer.
2
Enter the programming mode and push selection key "1 espresso"(nr. 2).
3
Stop brewing when you reach the desired quantity in the cup.
4
The machine stores automatically this brewing time as the optimal time.
5
If the brewing time (i.e. stored as optimal time) is now 20 sec., optimal range will be 16 ÷ 24 sec.
6
Repeat the operation for the other 3 selections : 1 long coffee , 2 coffees , 2 long coffees(3,5,6).
Warning
Never program the machine without ground coffee in the filterholder, follow instructions as per point 1.
HOW TO ENABLE THE FUNCTION
To enable the function lay the jumper shown in the picture 2:
Position A = function enabled
Position B = function disabled
pict. 2
Pict.
1
