Branson 3015h, Owner'S Manual

Page: 36 / 454

42hW-201601
1
-
30
Chapter 1 General InformatIon 3015r(h)/3515r(h)/4015r(h)/f36r(h)/f42r(h) traCtor
F42W121A
8.2.9 replaCInG enGIne oIl fIlter
Unscrew the filter element (1) and clean its
mounting surface.
Replace the O-ring on the surface which is to be
against a new filter.
Apply a thin film of clean oil around the seal ring
of a new filter.
Fit the new filter and tighten it by hand.
Start the engine and check the filter base for oil
leakage.
Stop the engine and check the oil level. If the
level is too low, add more oil.
1.
2.
3.
4.
5.
6.
CaUtIon

be sure to use the only branSOn genuine
oil filter not to damage the engine. replace
the oil filter only after the engine is stopped
and cooled down.
8.2.10 replacIng HST fIlTer [HST mOdel]
Turn the filter element (1) counterclockwise to
remove.
Apply a clean oil around the seal ring of element
of a new filter and tighten it.
Start the engine and check oil leakage after
operate forward and reverse.
1.
2.
3.
A42W110A