Branson 3015h, Owner'S Manual

Page: 397 / 454

7
-
1 42hw-201601
Chapter 7 eleCtriC system
7
3015r(h)/3515r(h)/4015r(h)/F36r(h)/F42r(h) traCtOr
4.7 turN sigNal lamp switCh, hazard warNiNg Flasher aNd Flasher uNit
The turn signal lamp switch of the combination switch receives power from the terminal ACC of the ignition
switch through a separate 20 A fuse.
1) Right turn: When setting the turn signal lamp switch to the right turn position, power is supplied to the Right turn: When setting the turn signal lamp switch to the right turn position, power is supplied to the Right turn: When setting the turn signal lamp switch to the right turn position, power is supplied to the
flasher unit from the terminal R through the wiring 0.85WR. Then the flasher unit changes continuous
power to intermittent power supplied to the front combination lamp, rear combination lamp and right turn
signal indicator on the instrument cluster to make each lamp flicker.
2) Left turn: When setting the turn signal lamp switch to the left turn position, power is supplied to the Left turn: When setting the turn signal lamp switch to the left turn position, power is supplied to the Left turn: When setting the turn signal lamp switch to the left turn position, power is supplied to the
flasher unit from the terminal L through the wiring 0.85WL. Then the flasher unit changes continuous
power to intermittent power supplied to the front combination lamp, rear combination lamp and left turn
signal indicator on the instrument cluster to make each lamp flicker.
The flasher unit has two input power wirings. One is the wiring 1.25RW which receives power from the
terminal ACC of the ignition switch. It branches off after the turn signal lamp fuse (20 A) and is connected
to the flasher unit. The power from the terminal ACC is used for the turn signal lamp when the flasher unit
receives a turn signal lamp signal from the turn signal lamp switch. The other input wiring is the wiring 2.0W
which supplies power directly from the battery through the 10 A fuse. This power is used for the turn signal
lamps on both sides when the hazard warning flasher switch is activated. This power is also used by the
fusible link for the ignition switch. Also, power for the hazard warning flasher is supplied to the hazard warning
flasher of the trailer as well.
#8
#8#
#3
#8
'38
583
)
#
5 3
#
-
5(:
58-
5
(
#
5
8
(
6#
'3(
5(
5(:
#
"
55
&
3
:
'64&#-*/, 108&3
,&:48*5$)
$
0.
#
*/
"
5
*0
/
4
8*
5$
)
%*
3&
$5
*0
/
4*
(
/"
-
-"
.
1
3
5
3"
*-&
3
%*
3&
$5
*0
/
4*
(
/"
-
-"
.
1
-
53
"*
-&
3
%
*3
&
$
5*
0
/
4
*(
/
"
-
-"
.
1
-
%
*3
&
$
5*
0
/
4
*(
/
"
-
-"
.
1
3
3
&"
3
$
0
.
#
*/
"
5*
0
/
-
"
.
1
3
.&5&31"/&- 3&
"3
$
0
.
#*
/"
5*0
/
-"
.
1
3
.&5&31"/&-
'-"4)&36/*5
)";"3%48
"
'
6
4
&
'
6
4
&
"
$
#3
#3
&
$
#
SRZHU
JURXQG
6015W709C