4
-
67
42hw-201601
Chapter 4 transmission
4
3015r(h)/3515r(h)/4015r(h)/F36r(h)/F42r(h) traCtor
A42W442A
K42W479A
A42W444A
8. Pull out the snap ring (1) and remove the range shift
driven gear 1st (2), 4WD gear (3) and snap ring (4).
When installing the 4WD gear, its higher boss
(A) should face the range shift driven gear 1st.
•
10. Unfold the caulking part of the counter shaft
mounting nuts (1) to unscrew the mounting nuts.
Then, remove the counter shaft in the rear axle
case by tapping outside direction. (Remove the
differential system assembly first)
mounting nut
tightening torque ................ 78.4 ~ 98 n.m
8 ~ 10 kgf.m
57.6 ~ 72 lb.ft
Notes
9. Remove the needle bearing (1), snap ring (2),
spacer (3), range shift C driven gear (4), range
shift driven gear 2nd (5), snap ring (6), range
shift driven gear 1st (7), 4WD gear (8) and snap
ring (9) from the counter shaft in order.
K42W478B
A42W443A
Summary of Contents for 3015h
