Installation Guide
AD1200 Reference
Figure 2-18. Removing Blanking Cover.
__________________________________
STEP 4 Choose an empty
expansion slot. The PC
AD1200 card will fit either a
full length or a short slot, a 8
bit PC type slot or a 16 bit
AT type slot. In general it is
wise to leave the larger slots
free for those boards that insist
on greater room. Remove the
blanking cover protecting the
slot on the PC back panel.
KEEP the blanking cover
screw safely for later.
Figure 2-19. Inserting The PC AD1200 Card.
_______________________________________
STEP 5 Now insert the PC
AD1200 card in the slot. Be
careful to ensure that the gold
plated pcb fingers fits neatly
into the i/o expansion
connector. Press down firmly
but evenly on the top of the
PC AD1200 card.
STEP 6 The 50 way IDC
connector should fit neatly
through the slot’s aperture to
the outside world.
Use the screw kept back from the blanking cover to screw the
PC AD1200 retaining bracket into the PC back panel housing.
Chapter 2
Page 45
