AD1200 Reference
Installation Guide
Figure 2-10. D/A Output Range Selection.
____________________________________
DAC OUTPUT RANGE.
_________________
BUCBA
PN
I
ÚÄÄÄÄÄ¿
³þÛþÛÛ³
0 to +10 Volts
UNIPOLAR
ÀÄÄÄÄÄÙ
ÚÄÄÄÄÄ¿
³þÛÛþÛ³
0 to +5 Volts
UNIPOLAR
ÀÄÄÄÄÄÙ
ÚÄÄÄÄÄ¿
³ÛþþÛþ³
-10 to +10 Volts
BIPOLAR
ÀÄÄÄÄÄÙ
ÚÄÄÄÄÄ¿
³ÛþþÛÛ³
-5 to +5 Volts
BIPOLAR
DEFAULT
ÀÄÄÄÄÄÙ
ÚÄÄÄÄÄ¿
³ÛþÛþÛ³
-2.5 to +2.5 Volts
BIPOLAR
ÀÄÄÄÄÄÙ
A/D Configuration.
_________________
The gain of the AD converter, the input channel type and
the input voltage range can all be independently selected.
The A/D input channel number selection is under software
control. On the AD1200 and AD1210/11 the gain is also under
software control. On the AD1220/21 the gain cannot be set by
software but is selected using the ADC GAIN jumpers.
Input Channel Type.
The AD1200 card may be set for 16 channels of single ended
input, for 8 channels of differential input or for 16 channels of
pseudo differential input. The 6 A/D input select jumpers are in
centre right of the card.
Page 38
Chapter 2
