bpr Rotax 912 i Series, Maintenance Manual, Page: 189 / 458

Effectivity: 912 i Series
Edition 1/Rev. 0
d
053
45.
fm
MAINTENANCE MANUAL
BRP-Powertrain
72-30-00
Page 7
July 01/2012
Fig. 5
CYLINDER HEAD - REMOVAL
See Fig. 6 to Fig. 8 .
Fig. 6
Fig. 7
1. M6x20 Allen screw 2. 6.4 washer
3. Coolant elbow 4. Elbow flange
Step Procedure
11 Remove the knock sensor from cylinder 1.
To do this, see section 76-70-00 Sensors
and actuators.
Step Procedure
1 Loosen the M6x30 screw and washer.
2 Remove the valve cover with the large
and small O-rings.
1. M6x30 screw 2. 6.0 washer
3. Valve cover 4. O-rings
m
WARNUNG
NOTICE
Do not lose the O-rings!
Step Procedure
3 Loosen 2 hex. nuts.
4 Loosen 2 M8 collar cap nuts inside the
valve cover (diagonally).
1. Hex nuts 2. Collar cap nuts