
d
059
32
.f
m
MAINTENANCE MANUAL
BRP-Powertrain
Effectivity: 912 i Series
Edition 1/Rev. 0
00-00-00
Page 10
July 01/2012
3.1)
Safety information
General note
This information relates to the preparation and use of ROTAX aircraft engines
and has been utilized safely and effectively by BRP-Powertrain. However, BRP-
Powertrain disclaims liability for all damage and/or injuries resulting from the
improper use of the contents. BRP-Powertrain requires that any service be car-
ried out and verified by a technician that has a current iRMT rating.
Manual
This Manual has been prepared as a guide to correctly service and maintain all
ROTAX 912 i Series engines.
This edition was primarily published to be used by aircraft mechanics who
are already familiar with all service procedures relating to ROTAX aircraft
engines.
This Manual uses technical terms which may be slightly different from the
ones used in the Illustrated Parts Catalog.
It is understood that this Manual may be translated into another language.
In the event of any discrepancy the German version prevails.
Warning
It is your responsibility to be completely familiar with the safety instructions inclu-
ding warnings and cautions described in this Manual. These warnings and cau-
tions advise of specific operating and servicing methods that, if not observed, can
cause a serious engine malfunction or cause the engine to lose power in flight
which can result in loss of life, injury or damage to equipment.
It is, however, important to understand that these warnings and cautions are not
exhaustive. BRP-Powertrain could not possibly know, evaluate and advise the
user of all conceivable ways in which service might be done or of the possible
hazardous consequences of each way.
Safety instructi-
on
In addition to observing the instructions in our Manual, general safety and acci-
dent preventative measures, legal regulations and regulations of any aeronauti-
cal authority must also be observed.
Where differences exist between this Manual and regulations provided by any
authority, the more stringent regulation should be applied.
Illustration
The content depicts parts and/or procedures applicable to the particular product
at its time of manufacture. It does not include dealer and manufacturer modifica-
tions, whether authorized or not by BRP-Powertrain, after manufacturing the pro-
duct.
Locking devices
Locking devices (e.g. locking tab, self-locking fasteners, etc.) must be installed or
replaced with new ones, where specified. If the efficiency of a locking device is
impaired, it must be replaced.
Summary of Contents for Rotax 912 i Series
Page 457: ......