FXS Gateway Overview
- 106 -
Phone flash paramter
Flash frequency high : 800
Flash frequency low : 400
usr/config$
Figure 21-45 phone –print flash command
21.7.18
[bureau]
To set Hotline function.
usr/config$ bureau
Bureau line setting information and configuration
Usage:
bureau [-hotline [Port DestIP TELnum]]
bureau -print
-print Display Bureau line information and configuration.
-hotline Set Hot line information. (Port range: 1~6)
Note:
Hotline feature should be used together with:
$sysconf -service 1 (HotLine service)
Example:
bureau -hotline 1 192.168.4.69 628 2 192.168.4.200 999
usr/config$
Figure 21-46 bureau command list
Parameter Usages:
-print: Display current Hotline table.
-hotline: Define Line1 and Line2’s Hotline table respectively. The table is included [Line
number], [destination IP Address] and [destination Port or Number].
For example
1. Destination is a FXS device, 628 is its Line number
usr/config$ bureau -hotline 1 200.168.4.69 628
User picks up the Line1, and then hears the ring back tone generated from
destination. Of course, 628 are ringing simultaneously.
2. Destination is a FXO device, Port 3 is the one connected to PSTN Line.
