Bosslan 2AFXS User Manual Download Page 93

Page: 93 / 125

FXS Gateway Overview

- 82 -

Initialize OSS libraries...OK!

VP v1.42 stack open successfully.

Figure 21-16 flash –clean command

21.7.5

[commit]

Save changes after configuring Gateway.

usr/config$ commit

This may take a few seconds, please wait..

Commit to flash memory ok!

usr/config$

Figure 21-17 commit command

Note:

Users shall use [commit] to save modified value, or they will not be activated after

system reboot.

21.7.6

[ifaddr]

Configure and display Gateway network information.

usr/config$ ifaddr

LAN information and configuration

Usage:

ifaddr [-print]|[-dhcp used]|[-sntp mode [server]]

ifaddr [-ip ipaddress] [-mask subnetmask] [-gate defaultgateway]

ifaddr [-dns index [dns server address]] [-ipsharing used[ip address]]

ifaddr [-autodns used]

-print Display LAN information and configuration.

-ip Specify ip address.

-mask Set Internet subnet mask.

-gate Specify default gateway ip address

-dhcp Set DHCP client service flag (On/Off).

-sntp Set SNTP server mode and specify IP address.

-autodns Specify the way to obtain DNS Server (0:Manual/1:Auto).

Summary of Contents for 2AFXS






























































































































Search results

Summary of Contents for 2AFXS

Reviews:

Related manuals for 2AFXS

Brands by name

Popular brands

Bosslan 2AFXS, User Manual

Search results

Summary of Contents for 2AFXS

Reviews:

Related manuals for 2AFXS

Brands by name

Popular brands