FXS Gateway Overview
- 77 -
usr/config$ setmac
- enter mac address (xxxxxxxxxxxx):
For example:
usr/config$ setmac
- enter mac address (xxxxxxxxxxxx):0001a8002743
- the mac address is 00 01 a8 00 27 43
- if mac address is correct,please press 'y' to
setup configuration,else press 'n' to continue
y
- mac address configuraton OK.
usr/config$
Step 5. Set IP Address:
usr/config$ ifaddr –ip xxx.xxx.xxx.xxx –mask xxx.xxx.xxx.xxx –gate
xxx.xxx.xxx.xxx
Step 6. commit, reboot
usr/config$ commit
usr/config$ reboot
21.6 Commands with FXS Gateway
The following table lists all of the commands that you can use with the Gateway.
Refer to the following chapters for descriptions of commonly used commands.
This user’s guide describes commands that are helpful for configuring the
Gateway. Using commands not documented in the user’s guide can damage the
unit and possibly render it unusable.
Table 21-1 Commands with FXS Gateway
Command
DESCRIPTION
help
help/man/?[command]
quit
quit/exit/close.
debug
Show debug message.
reboot
Reboot local machine.
flash
Clean configuration from flash rom.
commit
Commit flash rom data.
ifaddr
Internet address manipulation.
time
Show current time.
ping
Test that a remote host is reachable.
