Bosslan 2AFXS User Manual Download Page 79

Page: 79 / 125

FXS Gateway Overview

- 68 -

Step 3.

Create a Hotline table with [line] command.

usr/config$ sysconf –service 1

usr/config$ bureau –hotline 1 10.2.2.2 201

This example means that if user picks up phone set of FXS Line1, gateway will

automatically dial out IP address of [201].

Note:

If this gateway is under P2P mode, please set the phone book firstly.

The IP address of “bureau” command indicates the IP address of called party

in P2P mode, or the proxy IP address in proxy mode.

Step 4.

After the configuration, [commit] and [reboot] the device.

usr/config$ commit

usr/config$ reboot

21.4.5

Behind IP-Sharing Mode

One Sets FXS Gateway

The function is for user whose network environment is behind IP Sharing device.

It is said Gateway is connected to the IP Sharing device.

An example such as ADSL network is in the following.

Figure 21-8 One Sets FXS Gateway

Step 1.

The WAN IP Address obtained from ADSL has two kinds of methods. One is

fixed IP Address, while user applies for one or more fixed IP Addresses. Another

is dynamic IP Address while user applies for dial-up connection way.

Step 2.

The LAN IP Address of User’s PC can be set as DHCP client in order to gain

a valid one.

Summary of Contents for 2AFXS






























































































































Search results

Summary of Contents for 2AFXS

Reviews:

Related manuals for 2AFXS

Brands by name

Popular brands

Bosslan 2AFXS, User Manual

Search results

Summary of Contents for 2AFXS

Reviews:

Related manuals for 2AFXS

Brands by name

Popular brands