Project Configurator
3–21
1070 072 262-101 (01.09) GB
3.1.9
Merge Configuration Files
When processing configuration files, several components can be created
and subsequently compounded into one entire system. This procedure al-
lows for the stepwise commissioning of individual system parts.
.
It is only possible to merge files with the identical options ”with system
component structure” or ”without system component structure”.
These options are determined when a new configuration is created and
cannot be changed, see page 3–10.
L
Merge configuration files via FILE
"
MERGE CONFIGURATION FILES.
D
Available files:
All files existing in the _Config:_CL550 directory with the identical option
”with system component structure” or ”without system component
structure” as the current configuration file.
L
Mark files.
L
Move files to the right hand side using ”Add”. Undo this using ”Remove”.
L
Add files to the current configuration file using ”OK”.
.
The system component structure – if it exists – will be maintained after
the files have been merged.
