Bosch CL550 Configuration And Commissioning Software Manual Download Page 55

Page: 55 / 99

Project Configurator

3–19

1070 072 262-101 (01.09) GB

3.1.8

Compare

The function ”compare” is always related to the configuration file that
is currently being processed.

Simple comparison configuration/PLC:
Quick overview of differences between the current and actually loaded
configuration.

Exact comparison configuration/PLC:
Precise overview of differences between the current and actually loaded
configuration.

Comparison configuration/file:
Precise overview of differences between the current and a further con-
figuration file.

Simple comparison configuration/PLC:

Mark components to be compared in the main
window.

Start comparison via menu CONFIGURATION

COMPARE

COMPARE CONFIGURATION

<–> PLC (SIMPLE) or symbol.

All system modules existing only in the network will be marked in color.

If the read out Rack_ID is in conformity with the Rack_ID of the configur-
ation file, the system modules with an own Rack_Slot_ID will only be in-
serted if they do not exist in the configuration file.

If the read out Rack_Slot_IDs have already been assigned, the sys-
tem modules found are inserted in the rack using the available
Rack_Slot_IDs.

If the found Rack_ID is not present in the configuration file, a new rack
including all system modules is added to the system.

All components which cannot be interpreted are additionally marked
with a question mark.

Differences between system modules existing on both sides are listed in
the status column, separated by commas.

Summary of Contents for CL550




































































































Search results

Summary of Contents for CL550

Reviews:

Related manuals for CL550

Brands by name

Popular brands

Bosch CL550, Configuration And Commissioning Software Manual

Search results

Summary of Contents for CL550

Reviews:

Related manuals for CL550

Brands by name

Popular brands