Bosch CL550 Configuration And Commissioning Software Manual Download Page 56

Page: 56 / 99

Project Configurator

3–20

1070 072 262-101 (01.09) GB

Exact comparison configuration/PLC:

Mark components to be compared in the main
window.

Open ”comparison” window via menu CONFIGURATION

COMPARE

COMPARE CONFIGURATION <–> PLC (EXACT).

Start comparison via ”Start”.

In the window ”Compare” the conformities or faults are listed.

The columns Rack Id and Mod. Id (Rack_Slot_ID) show the component
being examined.

The columns element shows in which parameter there is a difference;
e.g. the IP address appears if differences in IP addressing are found.

The column value (reference) shows the content of the currently dis-
played configuration file.

The column value (target) shows the content from the network.

The column status shows whether the content is identical or not identical.

Comparison configuration/file:

Mark components to be compared in the main
window.

Open comparison window via menu CONFIGURATION

COMPARE

COMPARE CONFIGURATION <–> FILE (EXACT).

Select file for comparison.

Start comparison via ”Start”.

In the window ”Compare” the conformities and faults are listed.

The columns Rack Id and Mod. Id (Rack_Slot_ID) show the component
being examined.

The column element shows in which parameter there is a difference; e.g.
the IP address appears if differences in IP addressing are found.

The column value (reference) shows the content of the currently dis-
played configuration file.

The column value (target) shows the content of the second file.

The column status shows whether the content is identical or not identical.

Summary of Contents for CL550




































































































Search results

Summary of Contents for CL550

Reviews:

Related manuals for CL550

Brands by name

Popular brands

Bosch CL550, Configuration And Commissioning Software Manual

Search results

Summary of Contents for CL550

Reviews:

Related manuals for CL550

Brands by name

Popular brands