Bosch CL550 Configuration And Commissioning Software Manual Download Page 50

Page: 50 / 99

Project Configurator

3–14

1070 072 262-101 (01.09) GB

3.1.5

Check Configuration File

The currently processed configuration can be checked for plausibility.

Insert via menu PRESETS

CHECK or symbol.

The following is checked:

IP addresses and Ethernet interface on the front side and on the back
side

Rack_ID

Rack_Slot_ID

Under menu item ”Presets”, the user can additionally activate the following
check options:

System module, rack, check *prj directory or the entire system whether
the frontside IP addresses are located in the same subnetwork.

Check the entire system whether the backside IP addresses are located
in the same subnetwork.

In case of complex configurations, checking the overall configuration
may take some time.

Following the check, entries with a fault are marked by a color. The status
text of the main window contains the pertaining fault text giving a detailed
description of the fault.

You may display the next faulty entry via:

Menu TOOLS

GO TO NEXT ERROR (F4)

Function key F4

Symbol

Summary of Contents for CL550




































































































Search results

Summary of Contents for CL550

Reviews:

Related manuals for CL550

Brands by name

Popular brands

Bosch CL550, Configuration And Commissioning Software Manual

Search results

Summary of Contents for CL550

Reviews:

Related manuals for CL550

Brands by name

Popular brands