Bosch CL550 Configuration And Commissioning Software Manual Download Page 47

Page: 47 / 99

Project Configurator

3–11

1070 072 262-101 (01.09) GB

Insert and Delete

After creating the basic configuration, the configuration file can be adapted
by inserting and deleting components.

Insert subsystem

Select line via this icon.

Insert via icon or via menu TOOLS

INSERT

or symbol.

Insert rack

Select line via this icon.

Insert via icon or via menu TOOLS

INSERT

or symbol.

Insert system module

Select rack into which the system module shall
be inserted.

Insert via icon or via menu TOOLS

INSERT or

symbol.

Delete subsystem, rack, or system module

Select line in which the subsystem, the rack, or
the system module is located.

Delete via icon or via menu TOOLS

DELETE or

symbol.

After creating the configuration file for the first time or after inserting
subsystems, racks, and/or system modules, some columns of the
main window will be assigned with default values which can be altered
later on.

Summary of Contents for CL550




































































































Search results

Summary of Contents for CL550

Reviews:

Related manuals for CL550

Brands by name

Popular brands

Bosch CL550, Configuration And Commissioning Software Manual

Search results

Summary of Contents for CL550

Reviews:

Related manuals for CL550

Brands by name

Popular brands