Bosch CL550 Configuration And Commissioning Software Manual Download Page 14

Page: 14 / 99

System Introduction

2–2

1070 072 262-101 (01.09) GB

Slot coding

The obligatory slot codes are as follows:

Slot 1 + 2:

NTx power supply

Slot 9:

CON550

The other assignments can be chosen freely. The configurator’s default set-
tings provide the following:

CPU modules (ZS...) are set from left to right, next to the power supply.

MAP modules are set from right to left.

Do not plug or unplug live modules.
When changing modules, accept and check all switching and jumper
positions.

ZS550

A ZS550 module (central processing unit) contains:

PLC functionality (program flow)

Busmaster PROFIBUS-DP (V1 functionality) for triggering the in- and
outputs

TCP/IP communication:

Backside: system bus communication

Frontside: external bus communication

Serial interface with BUEP19E, BUEP03, and BUEP64 (Bosch trans-
mission protocols)

The ZS550-DP-IBS mounting rack has been additionally provided with
an INTERBUS-S interface.

The I/O level must be exclusively interfaced via decentralized I/O mod-
ules (PROFIBUS-DP/V1).

CON550

The CON 550 module is an Ethernet switch for communication among the
ZS550 central processing units via the backside Ethernet connection.

COM-MAP

The COM-MAP module couples the ZS550 modules to a higher-level host
system (MAP MMS-EASE protocol).

Descriptions of the COM-MAP module are not part of this manual.

Summary of Contents for CL550




































































































Search results

Summary of Contents for CL550

Reviews:

Related manuals for CL550

Brands by name

Popular brands

Bosch CL550, Configuration And Commissioning Software Manual

Search results

Summary of Contents for CL550

Reviews:

Related manuals for CL550

Brands by name

Popular brands