Bosch B8512G, Program Entry Manual

Page: 59 / 284

Control Panel Panel Wide Parameters | en 59
Bosch Security Systems, Inc. Program Entry Guide 2017.03 | 09 | F.01U.303.998
If the Primary Destination Device is an IP Destination (Onboard IP, Plug-in Cellular IP, SDI2
Address 1, or SDI2 Address 2), the control sends the original event along with a COMM
TROUBLE report that includes an SDI2 number modifier (SDI2##). The SDI2 modifier identifies
the IP Destination Device type. Refer to the table below.
Destination Device
Type
SDI2 number
modifier for IP
Destination 1
SDI2 number
modifier for IP
Destination 2
SDI2 number
modifier for IP
Destination 3
SDI2 number
modifier for IP
Destination 4
Onboard Ethernet 10 20 30 40
Onboard Cellular 18 28 38 48
SDI2 Address 1 11 21 31 41
SDI2 Address 2 12 22 32 42
For example, a COMM TROUBLE report for Route Group 1 with the Primary Destination Device
assigned to Plug-in Cellular, Destination 2 would be: COMM TROUBLE RG1 SDI228
The control panel generates COMM TROUBLE events when positive acknowledgement from
the central station receiver to a polls are not received after the configured number of retries.
If all attempts to both the primary destination device and the backup destination device fail, a
COMM FAIL RG# event is generated. COMM RESTORE events are not generated for COMM
FAIL events.
Notice!
CAN/ULC S304 requirement, do not clear pending reports
When CAN/ULC S304 is set to YES, the control panel does not clear pending reports before
creating a COMM FAIL event. It continues to queue reports for the failed route until one of
the failed routes in the route group restores. If the queue reaches the capacity of the panel
event log, the oldest reports are cleared (overwritten).
3.10.1 Primary Destination Device
Default : No Device
Selections :
– No Device
– Onboard IP Destination 1
– Onboard IP Destination 2
– Onboard IP Destination 3
– Onboard IP Destination 4
– Plug-in Cellular Destination 1
– Plug-in Cellular Destination 2
– Plug-in Cellular Destination 3
– Plug-in Cellular Destination 4
– Plug-in Phone Destination 1
– Plug-in Phone Destination 2
– Plug-in Phone Destination 3
– Plug-in Phone Destination 4
– SDI2 address 1 Destination 1
– SDI2 address 1 Destination 2
– SDI2 address 1 Destination 3
– SDI2 address 1 Destination 4
– SDI2 address 2 Destination 1
– SDI2 address 2 Destination 2