Bosch B8512G, Program Entry Manual

Page: 54 / 284

54 en | Panel Wide Parameters Control Panel
2017.03 | 09 | F.01U.303.998 Program Entry Guide Bosch Security Systems, Inc.
3.9.6 Test Reports
Default:
Test Reports
Route Group 1 Route Group 2 Route Group 3 Route Group 4
Status Report Yes Yes Yes No
Test Report Yes Yes Yes No
Selections:
– Yes - assign this report to the Route Group.
– No - do not assign this report to the Route Group.
RPS Menu Location
Panel Wide Parameters > Report Routing > Test Reports.
3.9.7 Diagnostic Reports
Default:
Diagnostic Reports
Route Group 1 Route Group 2 Route Group 3 Route Group 4
SDI2 Device Failure Yes Yes Yes No
SDI2 Device Restoral Yes Yes Yes No
Watchdog Reset Yes Yes Yes No
Parameter Checksum Fail Yes Yes Yes No
Reboot Yes Yes Yes No
Phone Line Fail Yes Yes Yes No
Phone Line Fail Restoral Yes Yes Yes No
AC Failure Yes Yes Yes No
AC Restoral Yes Yes Yes No
Battery Missing Yes Yes Yes No
Battery Low Yes Yes Yes No
Battery Restoral Yes Yes Yes No
Route Comm Fail Yes Yes Yes No
Route Comm Restoral Yes Yes Yes No
Checksum Fail Yes Yes Yes No
Network Fail No No No No
Network Restoral No No No No
Network Condition No No No No
RF Interference Yes Yes Yes No
RF Interference Restore Yes Yes Yes No
Equipment Fail Yes Yes Yes No