To scroll through programs, press “
<
” button.
To start programs shown with “
*
”, press “
>
” button.
To exit Special programs, turn dishwasher off.
Programs shown with “
+
” are started with the
Start
button
(
don’t
run these programs).
Run only programs shown in
bold
type (error codes,
customer service & sales demo).
3.6
Sales demo (showroom) program
3.6.1
General instructions
Unlike with traditional dishwashers, do
NOT
disconnect drain
pumps when using sales demo programs. Dishwasher controls
run safety checks – if drain pumps or heat pumps are
disconnected, dishwashers will
NOT
run.
No disconnections are needed – just add one (1) gallon of water
(with bacteria stat) to dishwasher tanks. Heat pumps will run and
lights will light when program buttons are pushed. Drain pumps
do not run. It’s not necessary to plug drain hoses, but it’s a good
practice to prevent any possible water leakage.
3.6.2
SHE “Evolution” models
Entering Special programs
– Press and hold “
>
” and
Delay
buttons, then turn dishwasher on. Left program light will flash
and 2
nd
program light from left will be lit. (on SHE5AM models,
digital display will show “
P0
”).
Selecting sales demo program
- Press “
<
” button to scroll to
customer service test program. Left three LED displays will
be lit (on SHE5AM models, digital display will show “
P7
”).
Using sale demo program
- Press “
>
” button to start program.
Active
and
Regular Wash
lights will always be lit (on
SHE5AM models, digital display will always show “
1:23
”).
Pressing buttons will light corresponding light.
Exiting sales demo program
- Press and hold “
>
”and
Delay
buttons, then turn dishwasher off to exit program. Pressing
on/off button during sales demo program shows how
dishwasher resets, but does not reset dishwasher, turn
dishwasher off or exit sales demo program.
SHE LED
displays
SHE Sales demo pgm*
SHE digital
display
P7
3.6.3
SHX “Integra“ models
Entering Special programs
– Press and hold “
<
” and
“
>
”buttons, then turn dishwasher on.
Regular Wash
light will
flash and
Quick Wash
light will be lit.
Selecting sales demo program
- Press “
<
” button to scroll to
customer service test program. All three LED displays will be
lit.
Using sale demo program
- Press “
>
” button to start program.
Active
and
Regular Wash
lights will always be lit. Pressing
buttons will light corresponding light.
Exiting sales demo program
- Press and hold “
<
” and “
>
”
buttons, then turn dishwasher off to exit program. Pressing
on/off button during sales demo program shows how
dishwasher resets, but does not reset dishwasher, turn
dishwasher off or exit sales demo program.
SHX LED displays
Power
Scrub Regular Quick
SHX Sales demo program *
702_58300000130262_ara_en_c
Page 9 of 50
