3
OPERATION
3.1
Control layout
3.1.1
SHE models
3.1.2
SHX models
3.2
Using controls
Wash programs don’t have dedicated buttons, but are selected
by scrolling with left (“
<
”) and right (“
>
”) scroll buttons. After
turning on dishwashers, scroll left or right to the desired wash
program (shown by lit LED displays between scroll buttons). To
start the desired program, press the
Start
button.
3.3
Reset (“Cancel – drain”)
To
reset
, press and hold
Start
button until
Active
light goes out
or when display shows “
0.01
” -- for integrated models (with
buttons on top of the door), open door just enough to expose
buttons. Wait about one minute for dishwasher to stop draining --
with integrated models, door must be closed for dishwasher to
drain. To reset dishwasher, turn it off after it stops.
SHE4AM02UC
3.4
Changing basic settings
SHE4AM12U
Extra Dry
feature can be turned on or off and
rinse-aid dosage
can be changed using dishwasher controls. For many integrated
models,
End of Cycle tone volume
can also be changed.
SHE5AM02UC
3.4.1
SHE “Evolution” models
Turn dishwasher on, press and hold “
>
” button, then press and
hold
Start
button.
Clean
and
Sanitized
lights will be flashing
(
Extra Dry
mode). When lights are flashing, release buttons.
SHE Extra Dry
SHE Rinse Aid
SHE lights
Clean Sanitized
Rinse
Agent
SHX3AM02UC
702_58300000130262_ara_en_c
Page 6 of 50
