5.11 Lower door seals
The lower door seal is
attached by two of the four
inner door screws. It is
removed along with the
inner door.
Tools needed: T20 Torx & #2 Phillips screwdrivers and pliers
.
1.
Remove inner door
– section 5.9. The lower door seal
will be loose since it’s two (2) screws were removed when
the inner door was removed
(below left)
. If the seal sticks
to the inner door, separate the seal from the door by hand
(below left)
.
2. Remove lower door seal.
5.12 Heat pump disassembly
The heat pump is best accessed from the bottom of the
dishwasher by flipping it upside-down or on it’s back. Use the
same process to access the float and aqua sensor.
1. Float assy.
2. Adapter
3. Clamp
4. Sump
5. Seal ring
6. Heat pump
2
1
6
3 4
5
Tools needed: T20 Torx, #2 Phillips & small flat blade
screwdrivers and pliers
.
1.
Remove toe kick
– section 5.1.4.1.
2.
Flip dishwasher for access
– section 5.1.6.1.
702_58300000130262_ara_en_c
Page 33 of 50
