2.4
Water connection
Install according to national and local codes.
Carefully place dishwasher on its back to make water
connections to the water inlet valve. Use a 90º elbow fitting with
Teflon tape as needed. Don’t overtighten.
Attach the hot water line to the 90° elbow and route it underneath
the unit toward the hot water connection. Make sure the line
doesn’t contact any moving parts.
2.5
Drain and condensation hose connections
Plumbing installations will vary - refer to local codes. The
maximum length of the drain hose, including leading to an air gap
(if any) is 150" (381 cm). Make sure a high loop is raised at least
20" (51 cm) above the floor.
Drain hose has its own adapter – connect directly to plumbing
connection and secure with supplied hose clamp. Don’t connect
to condensation hose.
702_58300000130262_ara_en_c
Page 5 of 50
