manualshive.com logo in svg

Bosch AMAX panel 2000 EN ICP-AMAX-P-EN, Installation Manual, Page: 22 / 92

Share
Download
Bosch AMAX panel 2000 EN ICP-AMAX-P-EN Installation Manual Download Page 22

22

en | User Guide

AMAX panel 2000 / AMAX panel 2000 EN

F.01U.241.127 | V4 | 2011.12

Installation Manual

Bosch Sicherheitssysteme GmbH

Zone description

Zone 1 ______________________________________________________

Zone 2 ______________________________________________________

Zone 3 ______________________________________________________

Zone 4 ______________________________________________________

Zone 5 ______________________________________________________

Zone 6 ______________________________________________________

Zone 7 ______________________________________________________

Zone 8 ______________________________________________________

Exit Time ___________________________________________________ sec

Entry Time _________________________________________________ sec

User Code Names

Code 1 _____________________________________________________

Code 2 _____________________________________________________

Code 3 _____________________________________________________

Code 4 _____________________________________________________

Code 5 _____________________________________________________

Code 6 _____________________________________________________

Code 7 _____________________________________________________

Code 8 _____________________________________________________

Code 9 _______________________________________________________Keyfob 1

Code 10 _____________________________________________________ Keyfob 2

Code 11 _____________________________________________________ Keyfob 3

Code 12 _____________________________________________________ Keyfob 4

Code 13 _____________________________________________________ Keyfob 5

Code 14 _____________________________________________________ Keyfob 6

Code 15 _____________________________________________________ Keyfob 7

Code 16 _____________________________________________________ Keyfob 8

4.1

Arming the System

4.1.1

Arming in AWAY mode

Arming the system in AWAY Mode is normally performed when you leave the premises and 

require that all zones are activated in a ready state to detect an intrusion.

Keypad arming

The system can be set to AWAY mode in two different ways.

To arm the System in AWAY mode (method 1)

Enter your code and press [#].

Two beeps sound, the AWAY indicator flashes slow, and exit time starts. After exit time, the 

AWAY indicator turns is lit.

To arm the System in AWAY mode (method 2)

Press and hold [#] until it beeps twice.

NOTICE! 

When the number of incorrect code entries on the keypad reaches a specified number, the 

keypad will automatically lock for 180 seconds and alarm is reported.If the keypad is idle for 4 

minutes, the system will automatically exit from any operational mode.

Summary of Contents for AMAX panel 2000 EN ICP-AMAX-P-EN





























































































Reviews:

No comments