bolid S2000-2, User Manual

Page: 45 / 100

S2000-2 Operating
45
www.bolid.com
DATA COMMUNICATIONS VIA RS-485 INTERFACE
The S2000-2 controller connected to an Orion network via RS-485 interface transmits condition and
trouble messages to the network controller, enabling remote alarm and trouble indication. These
messages are displayed by the network controller and can be redirected to other devices of the Orion
system, such as indicator modules or relay modules, for external alarm devices or executive modules
switching on as well as remote notification via a dedicated channel, phone line, GSM, Internet and so
on.
Condition Message Transmission
The S2000-2 controller is designed to send automatically condition and trouble messages to a net-
work controller through RS-485 interface line, among them:
IDENTIFICATION RIP-12 RS power has just been turned up
ACCESS GRANTED Upon two-person or three-person rule passage mode identifying of first
key is completed
PASSAGE Passage of a person is detected after access granted
ACCESS DENIED Access is denied for the presented access key
ILLEGAL CODE The unknown access key is presented to the reader after the S2000-2
with the network controller communications have been lost (the mes-
sage is stored in the S2000-2 memory)
ACCESS CLOSED Access through the walkway, doorway or lane is locked
ACCESS FREE MODE Access control is deactivated
ACCESS NORM MODE Access control has just been activated
DISARMED The alarm loop has just been disarmed and is not being monitored
ARMED Monitoring for the alarm loop conditions has just been activated
ARM FAILED Arming has failed because the loop is still disturbed
INTRUSION ALARM
USER’S CODE ENTR A loop arming/disarming identifier has been submitted to the reader
DOOR LEFT OPEN The door is open too long (for more than a specified time)
DOOR FORCED The door is forced open without access granted