BOGBALLE L15 base, Operator'S Manual, Page: 78 / 96

78
3580
Kg
10,4
Ha
338
Kg/Ha
28,3
Ha
Mark B-67
12,3
Km/h
540
rpm
22,50
Kg
0,3
%
+
- W
24,0 M
xxxx m
0
9
%
24,00
m
ENTER
ESC
Working Width
Cancel
Figure 1
Controls
M45, M35, L20 with CALIBRATOR ZURF
Manual Section Control Standard
● After spreading the headland, do normal spreading in the tramlines.
●
When entering the wedge, press either of the wedge buttons and press minus to decrease the working width in
steps
(see figure 1)
.
● When leaving the wedge, press either of the wedge buttons and press plus to increase the working width in
steps
(see figure 1)
.
With GPS control
● After spreading the headland, do normal spreading.
● With the CALIBRATOR ZURF automatically controlled by GPS, the adjustment is done automatically.
For more information see manual from the manufacturer of the GPS system.
M45, M35, L20, L15 with CALIBRATOR ICON
Manual Section Control Standard
● After spreading the headland, do normal spreading in the tramlines.
● When entering the wedge press minus to decrease the quantity/working width in steps.
●
When leaving the wedge press plus to increase the quantity/working width in steps.
With GPS control
● After spreading the headland, spread normally in the tramlines.
● With the CALIBRATOR ICON automatically controlled by GPS, the adjustment is done automatically.
For more information see manual from the manufacturer of the GPS system.
Spreading on non rectangular fields