BOGBALLE L15 base, Operator'S Manual, Page: 58 / 96

58
A 15-35 cm A 35-55 cm
- 12 4° 3°
15 - 42 3° 2°
= 2°
= 45 cm
= (2° + 2°) = 4°
Working width
Tilt addition (°) Tilt addition (°)
metres
metres
Tilt angle normal spreading (15-42 metres) according to spread chart
Height above crop
Tilt angle by late application
Find the correct addition to the tilt angle in the chart below:
Example:
Working height - late application
Move the link pins of the spreader to the lowest position to lift the spreader as much as possible. This will minimize
the risk of damage to the crop.
The tilt angle depends on the working width and the distance between the top of the crop and the spreading discs
A
(see figure 1)
.
Figure 2
Top of the crop
Figure 1
Spreader settings
Working height - standard
Distance from the centre of the upper link pins to the top of the crop:
M60W, M45W, M35W, L20W, M45, M35 and L20:
75 cm
(see figure 1)
L15: 55 cm
(see figure 2)