BOGBALLE L15 base, Operator'S Manual, Page: 30 / 96

30
M
Ha Kg
Kg/Ha Ha
Kg
Km/h rpm
%
Kg/Ha
%
m
Field
-77 0,0
255 3,7
A-2
12,3 540
28,57 -28,6
24,0
0
256
0
Settings
Spreader Model
Scale definition
Speed Input
Actuator Calibration
Load Cell Calibration
Hopper Sensor
Calibrate IC
Tests
Data Transfer
STD
MAX
MAX+
MIN
MIN
M
Ha Kg
Kg/Ha Ha
Kg
Km/h rpm
%
Kg/Ha
%
m
Field
-77 0,0
255 3,7
A-2
12,3 540
28,57 -28,6
24,0
0
256
0
Fixed Scale
Adjust Scale [+/-]
min:
max:
0,1
9,0
Confirm
Cancel
ESC
ENTER
1,5
The position of the hopper bottom can also be defined via MENU and Scale definition. This gives further access
to define MIC – position for spreading micro granular and small seeds, which automatically leads to “Fixed Scale”
setting.
* In L20, L20W configuration only STD, MIN, MIC is displayed.
The Scale pointer setting must be set according to the spread chart, valid for the actual media at a defined fixed
forward speed.
NOTE: Do not use the full automatic calibration (FAC) when spreading small seeds, slug pellets etc.
Scale definition (MIC) *.
MIC Flow-outlet setting = Fix-scale setting
Calibration and quantity setting
M-line, L20W, L20 & CALIBRATOR ZURF, micro granular / small seeds with fixed scale