BOGBALLE L15 base, Operator'S Manual, Page: 16 / 96

16
Figure 3
Figure 2
Top of the crop
Figure 1
2 - How to set the spreader
2.1 Standard working height: 75 cm from the upper link to the top of the crop
(see figure 1)
Special for L15. Standard working height: 55 cm from upper link to top of the crop (see page 52 figure 2)
For late application see chapter ’Spreader settings/Working height - late application’ page 52
2.2 Find the relevant spread chart on www.bogballe.com or via the BOGBALLE Spread Chart app
(see chapter ’Spread Charts’ page 21)
2.3 Carry out a calibration for quantity setting (see page 22)
2.4 Fix the scale stop according to the FlowFactor
2.5 Check type of vanes according to spread chart
2.6 Set the position of the vanes according to spread chart
2.7 Set the tilt angle of the spreader according to spread chart
(see figure 2)
Special for L15. Always horizontally levelled
(see figure 3)
1 - Mounting
1.1 Mount the spreader in levelled position
1.2
Check that the PTO has a correct length in order not to damage the transmission.
(For further information see page 10 and 50)
Quick Guide - M45, M35, L20, L15 with mechanical control