BOGBALLE L15 base, Operator'S Manual, Page: 60 / 96

60
Figure 2 Figure 1
With CALIBRATOR
The quantity setting is made in the CALIBRATOR.
Make sure that the scale stop is fixed on 9.
For further instructions please see the CALIBRATOR manual.
With mechanical control
It is recommended to do an S-indicator calibration of the fertiliser to find the correct quantity setting and the corre -
sponding scale setting.
Alternatively, the scale must be set according to the spread chart for the actual fertiliser product
(see page 55)
.
When the correct scale setting is found, fix the scale stop accordingly
(see figure 2)
.
Quantity setting
The quantity (Kg/Ha) is set by the scale pointer of the spreader
(see figure 1)
.
The setting system is equipped with a scale, a scale stop and a scale pointer. The scale runs from 0 to 9 in 0,25
steps. Each scale number corresponds with the quantity (Kg/Ha) on the specific working width.
Spreader settings