manualshive.com logo in svg

BMW X5 2013, Owner'S Manual

The BMW X5 2013 Owner's Manual is your comprehensive guide to operating and maintaining your luxury SUV. Easily download this essential manual for free from manualshive.com and gain detailed insights on every aspect of your BMW X5 2013, ensuring a seamless driving experience from day one.

Share
Download
background image

Deactivate the rain sensor in car washes
Deactivate the rain sensor when passing

through an automatic car wash; otherwise,
damage could be caused by undesired wiper
activation.◀

Rain sensor, sensitivity

Turn the thumbwheel.

Clean the windshield, headlamps

Pull the wiper lever.
The system sprays washer fluid on the wind‐
shield and activates the wipers briefly.

In addition, the headlamps are cleaned at regu‐
lar intervals when the vehicle lights are
switched on.

Do not use the washer system at freezing
temperatures

Do not use the washers if there is any danger
that the fluid will freeze on the windshield; oth‐
erwise, your vision could be obscured. For this
reason, use antifreeze.

Avoid using the washer when the reservoir is
empty; otherwise, you could damage the
pump.◀

Windshield washer nozzles

The windshield washer nozzles are automati‐
cally heated while the ignition is switched on.

Rear window wiper

Switching on the rear window wiper

Turn switch from idle position 0 upward, ar‐
row 1: interval mode. When reverse gear is en‐
gaged, the system switches to continuous op‐
eration.

Cleaning rear window

In interval mode: turn the switch further up‐
ward, arrow 2. The switch automatically re‐
turns to its interval position when released.
In idle position: turn switch downward, arrow 3.
The switch automatically returns to its idle po‐
sition when released.

Fold-out position of the wipers

Required when changing the wiper blades or
under frosty conditions, for example.

1.

Switch the ignition on and off again.

2.

Under frosty conditions, ensure that the
wiper blades are not frozen onto the wind‐
shield.

3.

Press the wiper lever up beyond the point
of resistance and hold it for approx. 3 sec‐

Seite 75

Driving

Controls

75

Online Edition for Part no. 01 40 2 910 949 - VII/13

Summary of Contents for X5 2013


































































































































































































































































Reviews:

No comments

Related manuals for X5 2013

hager witty park XEV6 Series Installation Manual preview
witty park XEV6 Series
Brand: hager Pages: 9
Monacor CARPOWER CAP-12XHQ Manual preview
CARPOWER CAP-12XHQ
Brand: Monacor Pages: 5
Jeep Grand Cherokee WK2 Owner'S Manual preview
Grand Cherokee WK2
Brand: Jeep Pages: 338
DEFA 412737 Fitting Instructions Manual preview
412737
Brand: DEFA Pages: 7
Prorack K869 Fitting Instructions Manual preview
K869
Brand: Prorack Pages: 15
TUFLOC Dodge Charger TufBox Installation Instructions Manual preview
Dodge Charger TufBox
Brand: TUFLOC Pages: 6
Toyota 4Runner 2019 Quick Reference Manual preview
4Runner 2019
Brand: Toyota Pages: 52
Baja Designs 447575 Instructions preview
447575
Brand: Baja Designs Pages: 5
Guidosimplex 907P User Manual preview
907P
Brand: Guidosimplex Pages: 8
RHOX LGT-381L Installation Instructions Manual preview
LGT-381L
Brand: RHOX Pages: 8
v.link VL2-MBN2 Manual preview
VL2-MBN2
Brand: v.link Pages: 12
r.LiNK RL2-MMI3G-GW Manual preview
RL2-MMI3G-GW
Brand: r.LiNK Pages: 21
Mazda 0000-8L-G03A Installation Instructions preview
0000-8L-G03A
Brand: Mazda Pages: 3
Whelen Engineering Company LED Dominator TAM83S2 Installation Manual preview
LED Dominator TAM83S2
Brand: Whelen Engineering Company Pages: 2
Reliant ROBIN 850 Workshop Manual preview
ROBIN 850
Brand: Reliant Pages: 206
Yakima LockNLoad LightenUp Manual preview
LockNLoad LightenUp
Brand: Yakima Pages: 13
Or-Fab 82301 Installation Instructions preview
82301
Brand: Or-Fab Pages: 3
Valeo 632201 Instruction Manual preview
632201
Brand: Valeo Pages: 76

Brands by name

Popular brands

Load more brands