manualshive.com logo in svg

BMW X5 2013, Owner'S Manual

The BMW X5 2013 Owner's Manual is your comprehensive guide to operating and maintaining your luxury SUV. Easily download this essential manual for free from manualshive.com and gain detailed insights on every aspect of your BMW X5 2013, ensuring a seamless driving experience from day one.

Share
Download
background image

Shift paddles

The shift paddles on the steering wheel allow
you to shift gears quickly while keeping both
hands on the steering wheel.
If the shift paddles on the steering wheel are
used to shift gears in automatic mode, the
transmission temporarily switches to manual
mode.
If the shift paddles are not used and the vehicle
is not accelerated for a certain time, the sys‐
tem switches back into automatic mode if the
selector lever is in transmission position D.

▷

Shift up: pull right shift paddle.

▷

Shift down: pull left shift paddle.

Gears will only be shifted at appropriate engine
and road speeds, e.g., downshifting is not pos‐
sible if the engine speed is too high.
The selected gear is briefly displayed in the in‐
strument cluster, followed by the current gear.

Displays in the instrument cluster

The transmission position is dis‐
played, e.g.: P.

Sport automatic transmission: launch

Control

The concept

Launch Control enables optimum acceleration
on surfaces with good traction.

Hints

Component wear
Do not use Launch Control too often;

otherwise, this may result in premature wear of
components due to the high stress placed on
the vehicle.◀

Did not use Launch Control during the break-
in, refer to page 

188

, period.

To increase vehicle stability, activate DSC
again as soon as possible.

Requirements

Launch Control is available when the engine is
warmed up, that is, after uninterrupted driving
of at least 6 miles/10 km.
To start with Launch Control do not steer the
steering wheel.

Start with launch control

While the engine is running:

1.

  Press button or select with the

Driving Dynamics Control Sport+.
TRACTION is displayed in the instrument
cluster and the indicator lamp for DSC OFF
lights up.

2.

Engaging the transmission position S

3.

With the left foot, forcefully press down on
the brake.

4.

Press on the accelerator beyond the resist‐
ance point at the full throttle position.
A flag symbol appears in the instrument
cluster.

5.

The starting engine speed adjusts. Within
3 seconds, release the brake.

Before using Launch Control, allow the trans‐
mission to cool down for approx. 5 minutes.
Launch Control adjusts to the surrounding
conditions, e.g., wet pavement, when used
again.

Seite 79

Driving

Controls

79

Online Edition for Part no. 01 40 2 910 949 - VII/13

Summary of Contents for X5 2013


































































































































































































































































Reviews:

No comments

Related manuals for X5 2013

Toyota 2016 RAV4 Quick Reference Manual preview
2016 RAV4
Brand: Toyota Pages: 56
GMC YUKON 2018 Owner'S Manual preview
YUKON 2018
Brand: GMC Pages: 425
PUTCO MOLLE PANELS RAM 2500 Instruction Manual preview
MOLLE PANELS RAM 2500
Brand: PUTCO Pages: 4
Westfalia Portilo 350000 Installation And Operating Instructions Manual preview
Portilo 350000
Brand: Westfalia Pages: 18
Yakima Whispbar K887W Fitting Instructions Manual preview
Whispbar K887W
Brand: Yakima Pages: 19
Nav TV UCI-11C NTV-KIT331 User Manual preview
UCI-11C NTV-KIT331
Brand: Nav TV Pages: 4
Meta System FrontPlate4 Manual preview
FrontPlate4
Brand: Meta System Pages: 16
Sumitomo Dunlop L.D02.C.M Installation Manual preview
Dunlop L.D02.C.M
Brand: Sumitomo Pages: 22
Bestop 614.04 Installation Manual preview
614.04
Brand: Bestop Pages: 31
Improved Racing E5G-601 Instructions Manual preview
E5G-601
Brand: Improved Racing Pages: 17
Carcomm CHFS-34 HTC Installation Manual preview
CHFS-34 HTC
Brand: Carcomm Pages: 2
Toyota SUPRA 1987 Electrical Wiring Diagram preview
SUPRA 1987
Brand: Toyota Pages: 165
National Cycle Quantum Wash'n'Wipe N30208 Assembly Instructions And Owner'S Manual preview
Quantum Wash'n'Wipe N30208
Brand: National Cycle Pages: 12
Columbia THERAPEDIC 2000 Instructions For Use Manual preview
THERAPEDIC 2000
Brand: Columbia Pages: 14
Mazda 2008 B2300 Truck Owner'S Manual preview
2008 B2300 Truck
Brand: Mazda Pages: 280
Safe Fleet Prime Design VBI-FT31B Assembly Instructions Manual preview
Prime Design VBI-FT31B
Brand: Safe Fleet Pages: 12
Suzuki SX4 2016 Owner'S Manual preview
SX4 2016
Brand: Suzuki Pages: 504
Ford 2000 F 350 Owner'S Manual preview
2000 F 350
Brand: Ford Pages: 256

Brands by name

Popular brands

Load more brands