manualshive.com logo in svg

BMW X5 2013, Owner'S Manual

The BMW X5 2013 Owner's Manual is your comprehensive guide to operating and maintaining your luxury SUV. Easily download this essential manual for free from manualshive.com and gain detailed insights on every aspect of your BMW X5 2013, ensuring a seamless driving experience from day one.

Share
Download
background image

The radio ready state is switched on.

3.

Set the parking brake.

Automatic Engine Start/Stop

Function

The concept

The Auto Start/Stop function helps save fuel.
The system switches off the engine during a
stop, e.g., in a traffic congestion or at traffic
lights. The ignition remains switched on. The
engine starts again automatically for driving
off.
Certain vehicle components may experience
additional wear as a result of this system.

Automatic mode

The Auto Start/Stop function is operational af‐
ter each engine start.
This function is activated at speeds faster than
about 3 mph, approx. 5 km/h.

Engine stop

The engine is switched off automatically dur‐
ing a stop under the following conditions:
Automatic transmission:

▷

The selector lever is in transmission posi‐
tion D.

▷

The brake pedal remains pressed while the
vehicle is stationary or the vehicle is held
by Automatic Hold.

▷

The driver's seat belt is buckled or the driv‐
er's door is closed.

The air volume of the air conditioner is reduced
when the engine is switched off.

Displays in the instrument cluster

The display indicates that the
automatic engine start-stop
function is ready for an auto‐
matic engine start.

The display indicates that the
conditions for an automatic en‐
gine stop have not been satis‐
fied.

Note

The engine is not switched off automatically in
the following situations:

▷

External temperature too low.

▷

The external temperature is high and auto‐
matic climate control is running.

▷

The passenger compartment has not yet
been heated or cooled to the required
level.

▷

The engine is not yet at operating temper‐
ature.

▷

The wheels are at a sharp angle or the
steering wheel is being turned.

▷

After driving in reverse.

▷

Fogging of the windows when the auto‐
matic climate control is switched on.

▷

Vehicle battery is heavily discharged.

▷

The engine compartment lid is unlocked.

▷

HDC Hill Descent Control is activated.

▷

The parking assistant is activated.

▷

Stop-and-go traffic.

▷

The transmission selector lever is in posi‐
tion N or M/S.

▷

Use of fuel with high ethanol content.

Starting the engine

The engine starts automatically under the fol‐
lowing conditions:

▷

Automatic transmission:
By releasing the brake pedal.
When Automatic Hold is activated: press
the accelerator.

After the engine starts, accelerate as usual.

Seite 68

Controls

Driving

68

Online Edition for Part no. 01 40 2 910 949 - VII/13

Summary of Contents for X5 2013


































































































































































































































































Reviews:

No comments

Related manuals for X5 2013

K&M 8494 Installation Manual preview
8494
Brand: K&M Pages: 3
Quadratec Brute Strength 12057.0271 Installation Manual preview
Brute Strength 12057.0271
Brand: Quadratec Pages: 6
Mitsubishi 1998 FTO Technical Information Manual preview
1998 FTO
Brand: Mitsubishi Pages: 160
Cadillac 2004 CTS Owner'S Manual preview
2004 CTS
Brand: Cadillac Pages: 442
PUTCO MOLLE PANELS RAM 2500 Instruction Manual preview
MOLLE PANELS RAM 2500
Brand: PUTCO Pages: 4
Westfalia Portilo 350000 Installation And Operating Instructions Manual preview
Portilo 350000
Brand: Westfalia Pages: 18
Lit Lightz RGBW Rock Lights Setup Manual preview
RGBW Rock Lights
Brand: Lit Lightz Pages: 3
Xhorse VVDI User Manual preview
VVDI
Brand: Xhorse Pages: 48
Aries 205039 Installation Manual preview
205039
Brand: Aries Pages: 5
Mercedes-Benz MY17 c-class Operator'S Manual preview
MY17 c-class
Brand: Mercedes-Benz Pages: 354
Gigaware Gigaware 12-493 User Manual preview
Gigaware 12-493
Brand: Gigaware Pages: 8
Cadillac CTS 2011 Manual preview
CTS 2011
Brand: Cadillac Pages: 78
Laser PW-BT50AR Quick Start Manual preview
PW-BT50AR
Brand: Laser Pages: 3
3mk Hyper Car Charger 30W User Manual preview
Hyper Car Charger 30W
Brand: 3mk Pages: 6
Steinhof S-016 Fitting And Operation Manual preview
S-016
Brand: Steinhof Pages: 2
Sony CDX-HS70MW - Marine Stereo Service Manual preview
CDX-HS70MW - Marine Stereo
Brand: Sony Pages: 42
Rampage I-TVR-01 Installation Instructions Manual preview
I-TVR-01
Brand: Rampage Pages: 33
RAM 1500 2019 Quick Reference Manual preview
1500 2019
Brand: RAM Pages: 20

Brands by name

Popular brands

Load more brands