BMW X5 2013 Owner'S Manual Download Page 91

Page: 91 / 257

▷

When driving very close to the vehicle in
front of you.

▷

When driving toward bright lights.

▷

When the windshield behind the interior
rearview mirror is fogged over, dirty or cov‐
ered by a sticker, etc.

▷

In the event of incorrect detection by the
camera.

▷

If the speed limits stored in the navigation
system are incorrect.

▷

In areas not covered by the navigation sys‐
tem.

▷

When roads differ from the navigation,
such as due to changes in the road net‐
work.

▷

When passing buses or trucks with a
speed sticker.

▷

If the traffic signs are non-conforming.

▷

During calibration of the camera immedi‐
ately after vehicle shipment.

Selection lists in the

instrument cluster

The concept

The following can be operated using the but‐
tons and the thumbwheel on the steering
wheel:

▷

Current audio source.

▷

Redial on telephone.

▷

Activation of the voice activation system.

Activating a list and creating the

setting

On the right side of the steering wheel, turn
the thumbwheel to activate the corresponding
list.
Using the thumbwheel, select the desired set‐
ting and confirm it by pressing the thumb‐
wheel.

Computer

Indication in the info display

The information from the on‐
board computer is shown in the
info display in the instrument
cluster.

Calling up information on the info

display

Press the onboard computer button on the
turn signal lever.
Information is displayed on the info display of
the instrument cluster.

Seite 91

Displays

Controls

Online Edition for Part no. 01 40 2 910 949 - VII/13

Summary of Contents for X5 2013


































































































































































































































































Search results

Summary of Contents for X5 2013

Reviews:

Related manuals for X5 2013

Brands by name

Popular brands

BMW X5 2013, Owner'S Manual

Search results

Summary of Contents for X5 2013

Reviews:

Related manuals for X5 2013

Brands by name

Popular brands