BMW X5 2013 Owner'S Manual Download Page 69

Page: 69 / 257

Safety mode

After the engine switches off automatically, it
will not start again automatically if any one of
the following conditions are met.

▷

The driver's safety belt is unbuckled and
the driver's door is open.

▷

The hood was unlocked.

Some indicator lamps light up for varying
lengths of time.
The engine can only be started via the Start/
Stop button.

Note

Even if driving away was not intended, the de‐
activated engine starts up automatically in the
following situations:

▷

Excessive warming of the passenger com‐
partment when the cooling function is
switched on.

▷

The steering wheel is turned.

▷

Automatic transmission: the transmission
position is changed from D to N, R, or M/S.

▷

Automatic transmission: the transmission
position is changed from P to N, D, R or
M/S.

▷

Fogging of the windows when the auto‐
matic climate control is switched on.

▷

Vehicle battery is heavily discharged.

▷

Excessive cooling of the passenger com‐
partment when the heating is switched on.

Preventing an automatic engine stop

with automatic transmission

The concept

To make it possible to drive away very quickly,
such as at an intersection, the automatic en‐
gine stop can be actively prevented.

Preventing an engine stop using the

brake pedal

The engine stop can be actively prevented
within one second after the vehicle comes to a
standstill.

▷

Immediately after the vehicle comes to a
standstill, briefly press the brake pedal
forcefully.

▷

Then press the brake pedal with normal
braking force.

Activating/deactivating the system

manually

Using the button

Press the button.

▷

LED comes on: Auto Start Stop function is
deactivated.
The engine is started during an automatic
engine stop.
The engine can only be stopped or started
via the Start/Stop button.

▷

LED goes out: Auto Start Stop function is
activated.

Switching off the vehicle during an

automatic engine stop

During an automatic engine stop, the vehicle
can be switched off permanently, e.g., when
leaving it.

Press the Start/Stop button. The ignition is
switched off. The Auto Start/Stop function
is deactivated.

Seite 69

Driving

Controls

Online Edition for Part no. 01 40 2 910 949 - VII/13

Summary of Contents for X5 2013


































































































































































































































































Search results

Summary of Contents for X5 2013

Reviews:

Related manuals for X5 2013

Brands by name

Popular brands

BMW X5 2013, Owner'S Manual

Search results

Summary of Contents for X5 2013

Reviews:

Related manuals for X5 2013

Brands by name

Popular brands