BMW X5 2013 Owner'S Manual Download Page 164

Page: 164 / 257

Switching on

Switch off the ignition.

Press the right side of the button

on the driver's side.

The symbol appears on the automatic cli‐

mate Control Display.
The interior temperature, air volume and air
distribution can be adjusted with the ignition
switched on.

Switching off

At the lowest fan speed, press the left side of
the button on the driver's side.

The symbol on the display of the automatic

climate control flashes.

Switching the system on/off

Switching off

▷

Complete system:

Press and hold the left button on
the driver's side until the control

clicks off.

▷

On the front passenger side:

Press and hold the left button on
the front passenger side.

Switching on

Press any button except:

▷

SYNC program.

▷

Rear window defroster.

▷

Left side of Air volume button.

▷

Seat heating.

▷

Seat ventilation.

Microfilter/activated-charcoal filter

The microfilter removes dust and pollen from
the incoming air.
The activated-charcoal filter removes gaseous
pollutants from the outside air that enters the
vehicle.

This combined filter should be replaced during
scheduled maintenance, refer to page

220

, of

your vehicle.

Ventilation

Front ventilation

▷

Thumbwheels to vary the temperature, ar‐
row 1.
Toward blue: colder.
Toward red: warmer.

▷

Lever for changing the air flow direction,
arrow 2.

▷

Thumbwheels for opening and closing the
vents continuously, arrows 3.

Adjusting the ventilation

▷

Ventilation for cooling:
Adjust the vent to direct the air in your di‐
rection, e.g., if the vehicle interior is hot
from the sun.

▷

Draft-free ventilation:
Adjust the vent to let the air flow past you.

Seite 164

Controls

Climate control

164

Online Edition for Part no. 01 40 2 910 949 - VII/13

Summary of Contents for X5 2013


































































































































































































































































Search results

Summary of Contents for X5 2013

Reviews:

Related manuals for X5 2013

Brands by name

Popular brands

BMW X5 2013, Owner'S Manual

Search results

Summary of Contents for X5 2013

Reviews:

Related manuals for X5 2013

Brands by name

Popular brands